Product photography basics for small stores
How to take clear, consistent product photos for a small online store using window light, a plain background, sensible angles and your phone.
You do not need a studio or an expensive camera to photograph products well. You need a window, a sheet of white card, a steady hand and the patience to shoot everything the same way. Most of what separates a good product photo from a poor one is light and consistency, and both are free.
This is the approach we suggest to store owners doing their own photos.
Light matters more than the camera
Soft daylight is the best light most small businesses have access to. Set up a table beside a large window on a bright day, out of direct sun. Direct sun gives hard shadows and blown out highlights. If the sun is streaming in, hang a white sheet or baking paper over the window to soften it, or wait for a cloudy day.
Turn off the room lights. Mixing daylight with ceiling bulbs gives you a yellow or green cast that is tedious to fix afterwards.
The side of the product facing away from the window will be darker. Stand a piece of white foam board or card on that side to bounce light back in. This one trick makes more difference than any piece of equipment you could buy.
Avoid the flash on your phone. It flattens everything and puts a hot white spot on anything shiny.
Keep the background plain
A plain background keeps attention on the product and makes your store look like one shop, not a collage. White or a very light grey works for almost everything.
The simplest setup is a large sheet of white card, taped to the wall at the top and curving down onto the table. That curve removes the line where the wall meets the table, so the product appears to sit in clean space.
A few notes:
- Iron or replace anything creased. Wrinkles show.
- Wipe the product. Dust, fingerprints and stray threads are far more visible in a photo than in real life.
- For white products, a pale grey or soft coloured card stops them disappearing.
Which angles to shoot
Shoot more than you think you need. For each product, aim for a standard set:
- Front on, straight. This is the main image.
- Three quarter view. Slightly to the side and above, which shows depth.
- Back or underside. Where there is a label, a clasp, a sole or a base people will ask about.
- Close detail. Texture, stitching, a glaze, the grain of the leather.
- Scale. The product in a hand, on a person or beside something familiar.
- In use. The candle lit on a shelf, the lead on an actual dog.
Keep the camera level and at the product's height for the front shot. Shooting down from standing height makes things look squat and distorted.
Consistency is what makes a store look professional
One beautiful photo is nice. Forty photos that match are what make a category page look trustworthy. When every thumbnail has the same background, the same framing and the same brightness, customers can compare products at a glance.
To get there:
- Mark the position of the table, the product and the phone with tape so you can recreate the setup next month
- Keep the product the same size in the frame each time
- Use the same crop shape for every image (square is the easiest to live with)
- Shoot at a similar time of day so the light matches
- Apply the same light edits to every photo
Getting more from your phone
Modern phone cameras are more than good enough. The weak point is usually how they are used.
- Clean the lens. It has been in your pocket. A quick wipe with a soft cloth removes the haze you did not know was there.
- Use a tripod or a prop. A cheap phone tripod, or a stack of books, keeps shots sharp and framing identical.
- Use the main lens. Skip the wide angle lens, which bends straight lines, and step back a little instead of zooming with your fingers.
- Tap to focus on the product, then slide the exposure up slightly if a white background is coming out grey.
- Turn on the grid in your camera settings to keep things straight.
- Skip the filters. Colour needs to be accurate. A customer who orders sage green and receives something closer to khaki will send it back.
For editing, keep it light: straighten, crop, lift the brightness a little and correct the white balance so white looks white. Compare the edited photo against the real product in daylight before you publish.
A simple routine for shoot day
Batching saves hours. Photographing one product at a time, whenever stock arrives, is how stores end up with mismatched images.
- Gather every product that needs shooting and clean each one.
- Set up by the window mid morning with your card background and bounce board.
- Fix the phone on a tripod and mark positions with tape.
- Shoot the full set of angles for one product before moving to the next.
- Check sharpness on a larger screen after the first product, before you shoot the other thirty.
- Edit in one sitting using the same adjustments.
- Name the files sensibly (blue-ceramic-mug-front, not IMG_4471) before uploading.
If your products are reflective, transparent or very small, such as jewellery or glassware, this is where a professional earns their fee. For most other things, a window and some care will get you a long way.